滑翔增程弹滑翔弹道优化设计分析

针对鸭式布局的滑翔增程弹,建立了滑翔增程弹滑翔弹道的模型,采用使滑翔弹道上每一点的升阻比最大的设计思想进行弹道优化设计,导出了俯仰舵偏角与平衡攻角的表达式,并对滑翔飞行弹道特性进行了仿真计算分析.仿真计算表明,滑翔弹道与常规弹道降弧段相比下降趋缓,增程效果显著.     

身管在加速弹丸激励下的振动研究

研究了弹丸运动冲击下的身管振动规律.通过分离主模态,给出了运动弹丸形成身管横向振动激励的机理,得出了弹丸激励作用下身管的振动响应,并通过案例计算,获得了在运动弹丸冲击作用下的身管振动规律.结果表明,弹丸加速度越大,身管振动幅值越小;随着弹丸加速度增大,在弹丸出口瞬间,炮口振动幅值达到最大;身管刚度越大,强迫振动幅值越小.     

隐身榴弹表面吸波材料的抗压强度分析

在火炮发射隐身榴弹过程中,由于隐身榴弹的静不平衡、动不平衡,造成隐身榴弹在膛内运动过程中碰撞膛线,其表面涂敷的吸波材料将承受较大的接触力.发射过程中应保证不损伤吸波材料表面,确保吸波材料具有良好的吸波性能、不增加隐身榴弹的雷达散射截面.从理论上计算了隐身榴弹与膛线之间的接触力,为研制隐身榴弹用的抗压吸波材料提供了设计指标.     

用弹体强非对称实现末敏弹稳态扫描的研究

末敏弹是一种高效的反装甲武器系统。当前,绝大部分末敏弹系统均使用降落伞实现稳态扫描,在分析这种稳态扫描技术优缺点的基础上提出了一种新的技术,即用单侧翼,也即用人为的子弹质量和空气动力的强非对称来实现稳态扫描。分析了该系统的受力情况,建立了二体动力学模型。该模型可用于末敏弹总体及其稳态扫描装置设计的研究中。     

脱壳弹弹托分离的双目视觉测量

脱壳弹的弹托分离过程对弹体的飞行稳定性和打击效能具有显著的影响。针对脱壳弹出膛后弹托相对弹体的六自由度运动过程,提出采用基于双目视觉原理的弹托分离角测量方法。通过在弹体表面和弹托表面设置标记点,采用图像处理和跟踪算法实现对标记点的识别和跟踪。结合双目空间标定参数解算出标记点的空间位置,进而获得弹托相对弹体的分离角度,同时采用实验验证了上述测量方法的精度,其精度达到2%。以实验室进行的初速度1 550 m/s和1 750 m/s的脱壳弹射击试验为例,测量并分析了不同初速度下的弹托分离轨迹。结果表明:脱壳弹分离初速度越快,弹托分离轨迹越靠近弹体。     

子弹均匀散布子母弹最有利火力分配方法

在将子弹均匀散布的椭圆区域等效转换为矩形区域的基础上,建立了适宽射向射击子母弹对矩形目标毁伤全概率计算的数学模型。通过函数转换和泛函分析给出了子弹均匀散布子母弹理想射击密度,得到了理想射击密度下对目标的毁伤概率计算公式。讨论了最有利火力分配方式的确定方法,给出了最优射向间隔和表尺差的计算公式,为便于实际应用,给出了最优火力分配计算中所需的3个参数的近似计算公式,最后给出了应用算例。     

球形头部弹丸侵彻运动靶板的数值模拟

为研究球形头部弹丸高速侵彻运动靶板的侵彻规律,运用LS-DYNA动力分析软件仿真研究了不同条件下球形头部弹丸对靶板的正侵彻效应,获得了运动靶板厚度、材料和弹丸着速3种参数对侵彻过程中弹丸弹道偏移、翻转角度和剩余速度的响应规律。结果表明,随着着速的提高,弹丸翻转幅度和弹道偏移量逐渐减小;随着靶板厚度的增加,弹丸正向翻转角度和轴向剩余速度显著减小,而弹道偏移量增大;3种材料运动靶板中,4340钢靶对弹丸弹道偏移、翻转角度和剩余速度的影响最大,Weldox460钢次之,LY12铝最小。     

长杆射弹侵彻三种混凝土靶的实验研究

为了研究钻地武器的侵彻性能,在57mm口径的气炮上发射长杆射弹对三种靶体进行模拟侵彻实验。靶体为水泥砂浆石靶、钢纤维混凝土靶和含单层密排刚玉球的钢纤维混凝土靶。实验结果表明,弹头形状对侵彻深度有明显影响;当长杆射弹和撞击速度都相同时,与侵彻钢纤维混凝土靶相比,含单层密排刚玉球的钢纤维混凝土靶中的侵彻深度大约降低了11%,而水泥砂浆石靶中的侵彻深度增加了12%。     

Experimental investigation on enhanced damage to fuel tanks by reactive projectiles impact

Enhanced damage to the full-filled fuel tank,impacted by the cold pressed and sintered PTFE/AL/W reactive material projectile(RMP)with a density of 7.8 g/cm3,is investigated experimentally and theoretically.The fuel tank is a rectangular structure,welded by six pieces of 2024 aluminum plate with a thickness of 6 mm,and filled with RP-3 aviation kerosene.Experimental results show that the kerosene is ignited by the RMP impact at a velocity above 1062 m/s,and a novel interior ignition phenomenon which is closely related to the rupture effect of the fuel tank is observed.However,the traditional steel projectile with the same mass and dimension requires a velocity up to 1649 m/s to ignite the kerosene.Based on the experimental results,the radial pressure field is considered to be the main reason for the shear failure of weld.For mechanism considerations,the chemical energy released by the RMP enhances the hydrodynamic ram(HRAM)effect and provides additional ignition sources inside the fuel tank,thereby enhancing both rupture and ignition effects.Moreover,to further understand the enhanced ignition effect of RMP,the reactive debris temperature inside the kerosene is analyzed theoretically.The initiated reactive debris with high temperature provides effective interior ignition sources to ignite the kerosene,resulting in the enhanced ignition of the kerosene.     

Partial penetration of annular grooved projectiles impacting ductile metal targets

Changing and optimizing the projectile nose shape is an important way to achieve specific ballistic performance. One special ballistic performance is the embedding effect, which can achieve a delayed high-explosive reaction on the target surface. This embedding effect includes a rebound phase that is significantly different from the traditional penetration process. To better study embedment behavior, this study proposed a novel nose shape called an annular grooved projectile and defined its interaction process with the ductile metal plate as partial penetration. Specifically, we conducted a series of low-velocity-ballistic tests in which these steel projectiles were used to strike 16-mm-thick target plates made with 2024-O aluminum alloy. We observed the dynamic evolution characteristics of this aluminum alloy near the impact craters and analyzed these characteristics by corresponding cross-sectional views and numerical simulations. The results indicated that the penetration resistance had a brief decrease that was influenced by its groove structure, but then it increased significantly-that is, the fluctuation of penetration resistance was affected by the irregular nose shape. Moreover, we visualized the distribution of the material in the groove and its inflow process through the rheology lines in microscopic tests and the highlighted mesh lines in simulations. The combination of these phenomena revealed the embed-ment mechanism of the annular grooved projectile and optimized the design of the groove shape to achieve a more firm embedment performance. The embedment was achieved primarily by the target material filled in the groove structure. Therefore, preventing the shear failure that occurred on the filling material was key to achieving this embedding effect.